Editing FileZilla server Tutorial (en) (section)

==Connecting to the Administration interface==
Connecting to the Administration interface can be done simply by entering the password and port you entered during the installation process. To connect on the same machine the FTP server is installed on, simply leave the IP address to 127.0.0.1 as this is the local loopback IP address, alternatively you can use ::1 if you're an IPv6 advocate. To connect from a remote computer within your LAN (Local Area Network) enter the static IP address applied to the FTP server. To connect from a remote computer outside your LAN create a port forwarding / NAT rule in your router, see [[#see also|Port Forwarding / NAT for remote access]] instructions below. Change the port to match the one set in your port forwarding rule and enter your public IP address (type "what's my IP" in to your favourite search engine) or us your Dynamic DNS address.</br>
'''Note:''' Connecting to the Administration interface from a remote computer will first require the installation of the Administration interface on the remote computer and an additional listener IP address and port applied in the administration settings, see [[#see also|Allowing Remote Administration]] instruction below)