Editing Cross Compiling FileZilla 3 for Windows under Ubuntu or Debian GNU/Linux

From FileZilla Wiki
Jump to navigationJump to search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
−
This documentation explains how to setup a build environment for [[FileZilla 3]] '''for Windows''' and how to compile it under [https://debian.org Debian] using [https://mingw-w64.org/ Mingw-w64]. It will take less time and is more simple than [[Compiling FileZilla 3 under Windows]].
+
This documentation explains how to setup a build environment for [[FileZilla 3]] '''for Windows''' and how to compile it under [http://ubuntu.com Ubuntu] or [http://debian.org Debian] using [http://www.mingw.org/ MinGW]. It will take less time and simple than [[Compiling FileZilla 3 under Windows]].
  
 
== OS version ==
 
== OS version ==
 +
* [http://ubuntu.com Ubuntu] 10.4 ('''recommended''')
 +
* [http://debian.org Debian] 5.0.3
 +
* [http://colinux.org coLinux] with [http://sourceforge.net/projects/colinux/files/Images%202.6.x%20Debian/Debian%205.0%20Lenny/Debian-5.0r2-lenny.7z/download Debian-5.0r2-lenny]
  
−
Any recent Linux should do the trick. For the sake of simplicity, this guide focuses on Debian(-based) distributions.
+
== Setting up the build environment ==
  
−
We strongly recommend to use [http://debian.org Debian '''12''' (Bookworkm)] or later ('''recommended''')
+
=== Ubuntu ===
  
−
== Setting up the build environment ==
+
Required packages
 +
sudo apt-get install -y mingw32 make g++ libtool bzip2 automake gettext wx-common
 +
 
 +
=== Debian ===
  
−
As root, execute:
+
Do works as root
−
  dpkg --add-architecture i386
+
  su -
−
apt update
 
−
apt install automake autoconf libtool make gettext lzip xz-utils
 
−
apt install mingw-w64 pkg-config wx-common wine wine64 wine32 wine-binfmt subversion git
 
  
−
Back as normal user, execute:
+
Required packages
−
  mkdir ~/prefix
+
  apt-get install -y mingw32 make g++ libtool bzip2 automake gettext wx-common
−
mkdir ~/src
 
−
export PATH="$HOME/prefix/bin:$PATH"
 
−
export LDFLAGS="-L$HOME/prefix/lib:$LDFLAGS"
 
−
export LD_LIBRARY_PATH="$HOME/prefix/lib:$LD_LIBRARY_PATH"
 
−
export PKG_CONFIG_PATH="$HOME/prefix/lib/pkgconfig:$PKG_CONFIG_PATH"
 
−
export TARGET_HOST=x86_64-w64-mingw32
 
  
−
wine reg add HKCU\\Environment /f /v PATH /d "`x86_64-w64-mingw32-g++ -print-search-dirs | grep ^libraries | sed 's/^libraries: =//' | sed 's/:/;z:/g' | sed 's/^\\//z:\\\\\\\\/' | sed 's/\\//\\\\/g'`"
+
== Patch mingw32-runtime (only Debian) ==
  
−
<!--
+
If you are using Ubuntu, go to the next [[#Make libraries]] section. In Ubuntu, the patch is applied.
−
<p style="font-size:150%;color:#ff0000">'''Beware:''' You need to patch your MinGW runtime!</p>
 
−
Note: This does not affect mingw-w64 >= v4.0.6, mingw-w64 v4.0.6 is available in Ubuntu 16.10.
 
  
−
The version of the MinGW runtime ships with Debian based distributions has broken string conversion functions. You need to fetch the source of the mingw-64 packet and apply the following two patches:
+
Because the version of mingw32-runtime in Debian 5 is [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=452977 broken] - Thanks [[CodeSquid]], patch mingw32-runtime package.
−
https://sourceforge.net/p/mingw-w64/mingw-w64/ci/2474f3904a1fbce19d96383a9633e6c2eeb427ea/
 
−
https://sourceforge.net/p/mingw-w64/mingw-w64/ci/bca09678e3bfd67b2d445127280ee5a1d9d0453a/
 
  
−
Without these patches, FileZilla will not work properly and will fail in obscure ways.
+
=== Get source package ===
−
-->
+
cd /tmp
 +
apt-get install dpkg-dev debhelper
 +
apt-get source mingw32-runtime
 +
cd mingw32-runtime-3.13/
 +
debian/rules unpack-stamp
  
−
== GMP ==
+
=== Patch snprintf bug ===
 +
pushd build_dir/src/mingw-runtime-3.13-20070825-1/mingwex/gdtoa/
 +
diff -u mingw_snprintf.c.org mingw_snprintf.c
 +
--- mingw_snprintf.c.org        2009-09-21 02:41:31.000000000 +0000
 +
+++ mingw_snprintf.c    2009-09-21 02:41:54.000000000 +0000
 +
@@ -465,7 +465,7 @@
 +
                                    len = LEN_LL;
 +
                                  }
 +
                                else
 +
-                                len = LEN_LL;
 +
+                                len = LEN_L;
 +
                                goto fmtloop;
 +
                        case 'L':
 +
                                flag_ld++;
 +
@@ -617,6 +617,7 @@
 +
                                        break;
 +
                                  case LEN_S:
 +
                                        *(short*)ip = c;
 +
+                                      break;
 +
                                  case LEN_LL:
 +
                                        *(long long*) ip = c;
 +
                                        break;
 +
popd
  
−
cd ~/src
+
=== Build & Install ===
−
wget https://gmplib.org/download/gmp/gmp-6.3.0.tar.lz
+
  debian/rules build
−
tar xf gmp-6.3.0.tar.lz
+
  debian/rules install
−
cd gmp-6.3.0
 
−
CC_FOR_BUILD=gcc ./configure --host=$TARGET_HOST --prefix="$HOME/prefix" --disable-static --enable-shared --enable-fat
 
−
  make
 
−
  make install
 
  
−
== Nettle ==
+
=== Copy new library ===
 +
mv $/usr/i586-mingw32msvc/lib/libmingwex.a $/usr/i586-mingw32msvc/lib/libmingwex.a.old
 +
cp debian/mingw32-runtime/usr/i586-mingw32msvc/lib/libmingwex.a $/usr/i586-mingw32msvc/lib/
  
−
cd ~/src
+
== Make libraries ==
−
wget https://ftp.gnu.org/gnu/nettle/nettle-3.9.1.tar.gz
+
Do works as normal user in Debian.
−
tar xf nettle-3.9.1.tar.gz
+
  exit
−
cd nettle-3.9.1
 
−
./configure --host=$TARGET_HOST --prefix="$HOME/prefix" --enable-shared --disable-static --enable-fat
 
−
make
 
−
  make install
 
  
−
== GnuTLS ==
+
=== Make working & install directory ===
 +
Check available space of storage.
 +
mkdir ~/mingw32
 +
mkdir /tmp/fz3
 +
cd /tmp/fz3
  
−
  cd ~/src
+
=== Setting up environment variables ===
−
  wget https://www.gnupg.org/ftp/gcrypt/gnutls/v3.8/gnutls-3.8.1.tar.xz
+
  export CFGPRE=~/mingw32
−
tar xvf gnutls-3.8.1.tar.xz
+
  export CFGOPT="--prefix=$CFGPRE --host=i586-mingw32msvc --disable-shared --enable-static"
−
cd gnutls-3.8.1
 
−
./configure --host=$TARGET_HOST --prefix="$HOME/prefix" --enable-shared --disable-static --without-p11-kit --with-included-libtasn1 --with-included-unistring --disable-srp-authentication --disable-dtls-srtp-support --disable-heartbeat-support --disable-psk-authentication --disable-anon-authentication --disable-openssl-compatibility --without-tpm --without-brotli --disable-cxx --disable-doc --enable-threads=windows --disable-tools
 
−
make
 
−
make install
 
  
−
== Compile SQLite ==
+
=== iconv ===
 +
wget ftp://ftp.gnu.org/gnu/libiconv/libiconv-1.13.1.tar.gz
 +
tar zxvf libiconv-1.13.1.tar.gz
 +
cd libiconv-1.13.1
 +
./configure $CFGOPT
 +
make install clean
 +
cd ..
  
−
cd ~/src
+
=== libidn ===
−
  wget https://sqlite.org/2018/sqlite-autoconf-32600-00.tar.gz
+
  wget ftp://alpha.gnu.org/gnu/libidn/libidn-1.17.tar.gz
−
  tar xvzf sqlite-autoconf-3260000.tar.gz
+
  tar zxvf libidn-1.17.tar.gz
−
  cd sqlite-autoconf-3260000
+
  cd libidn-1.17
−
  ./configure --host=$TARGET_HOST --prefix="$HOME/prefix" --enable-shared --disable-static --disable-dynamic-extensions
+
  ./configure $CFGOPT
−
  make
+
  make install clean
−
  make install
+
  cd ..
  
−
== NSIS ==
+
=== libgpg-error ===
 +
wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2
 +
tar jxvf libgpg-error-1.10.tar.bz2
 +
cd libgpg-error-1.10
 +
./configure $CFGOPT --disable-nls
 +
make install clean
 +
cd ..
  
−
cd ~/src
+
=== libgcrypt ===
−
  wget https://prdownloads.sourceforge.net/nsis/nsis-3.09-setup.exe
+
  wget ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2
−
  wine nsis-3.09-setup.exe /S
+
tar jxvf libgcrypt-1.5.0.tar.bz2
 +
  cd libgcrypt-1.5.0
 +
./configure $CFGOPT --disable-nls --disable-asm --with-gpg-error-prefix=$CFGPRE
 +
make install clean
 +
cd ..
  
−
The above may print a lot of errors and warnings. Ignore them, check for success this way:
+
=== GnuTLS ===
−
  [ -f "$HOME/.wine/drive_c/Program Files/NSIS/makensis.exe" ] && echo "Success!"
+
  wget ftp://ftp.gnu.org/pub/gnu/gnutls/gnutls-3.0.19.tar.bz2
 +
tar jxvf gnutls-3.0.19.tar.bz2
 +
cd gnutls-3.0.19
 +
./configure $CFGOPT --disable-nls --disable-cxx --disable-guile --with-libgcrypt-prefix=$CFGPRE
 +
make install clean
 +
cd ..
  
−
== Compile wxWidgets ==
+
=== wxWidgets ===
 +
wget http://downloads.sourceforge.net/wxwindows/wxWidgets-2.9.3.tar.bz2
 +
tar jxvf wxWidgets-2.9.3.tar.bz2
 +
cd wxWidgets-2.9.3
 +
mkdir compile
 +
cd compile
 +
../configure $CFGOPT --enable-unicode
 +
make install clean
 +
cd ../..
  
−
cd ~/src
+
== Compiling FileZilla 3 ==
−
  git clone --branch WX_3_0_BRANCH --single-branch https://github.com/wxWidgets/wxWidgets.git wx3
+
  wget http://downloads.sourceforge.net/filezilla/FileZilla_3.5.3_src.tar.bz2
−
cd wx3
+
  tar jxvf FileZilla_3.5.3_src.tar.bz2
−
  ./configure --host=$TARGET_HOST --prefix="$HOME/prefix" --enable-shared --disable-static
+
   
−
  make
+
  cd filezilla-3.5.3
−
  make install
+
  ./autogen.sh
−
  cp $HOME/prefix/lib/wx*.dll $HOME/prefix/bin
 
  
−
== Compile libfilezilla ==
+
mkdir compile
 +
cd compile
  
−
cd ~/src
+
autogen.sh of FileZilla 3 use old libgnutls-config. GnuTLS does not use libgnutls-config anymore.
−
svn co https://svn.filezilla-project.org/svn/libfilezilla/tags/0.33.0 lfz
 
−
cd lfz
 
−
autoreconf -i
 
−
./configure --host=$TARGET_HOST --prefix="$HOME/prefix" --enable-shared --disable-static
 
−
make
 
−
make install
 
  
−
== Compile Boost Regex ==
+
Dowload http://filezilla-project.org/codesquid/libgnutls-config to $CFGPRE/bin. Edit prefix value.
  
−
cd ~/src
+
  wget -O $CFGPRE/bin/libgnutls-config http://filezilla-project.org/codesquid/libgnutls-config
−
  wget https://boostorg.jfrog.io/artifactory/main/release/1.85.0/source/boost_1_85_0.tar.bz2
+
   
−
  tar xf boost_1_85_0.tar.bz2
+
  echo $CFGPRE
−
  cd boost_1_85_0
+
  /home/fz/mingw32 # remember the path
−
  echo "using gcc :  : x86_64-w64-mingw32-g++ ;" > user-config.jam
+
   
−
  ./bootstrap-sh
+
  vi $CFGPRE/bin/libgnutls-config
−
  ./b2 --user-config=./user-config.jam --build-type=minimal --with-regex --prefix=$HOME/prefix install
+
prefix=/home/fz/mingw32 # edit this line.
 +
 +
chmod +x $CFGPRE/bin/libgnutls-config
  
−
== Compile FileZilla ==
+
Configure and builld.
  
−
  cd ~/src
+
  CFLAGS="-I$CFGPRE/include" CXXFLAGS="-I$CFGPRE/include" LDFLAGS="-L$CFGPRE/lib" ../configure $CFGOPT --with-wx-prefix=$CFGPRE --with-libgnutls-prefix=$CFGPRE
−
svn co https://svn.filezilla-project.org/svn/FileZilla3/tags/3.56.0/ fz
+
−
cd fz
 
−
autoreconf -i
 
−
./configure --host=$TARGET_HOST --prefix="$HOME/prefix" --enable-shared --disable-static --with-pugixml=builtin
 
 
  make
 
  make
−
  # strip debug symbols
+
  strip src/interface/filezilla.exe
−
$TARGET_HOST-strip src/interface/.libs/filezilla.exe
 
−
$TARGET_HOST-strip src/putty/.libs/fzsftp.exe
 
−
$TARGET_HOST-strip src/putty/.libs/fzputtygen.exe
 
−
$TARGET_HOST-strip src/fzshellext/64/.libs/libfzshellext-0.dll
 
−
$TARGET_HOST-strip src/fzshellext/32/.libs/libfzshellext-0.dll
 
−
$TARGET_HOST-strip data/dlls/*.dll
 
−
cd data
 
−
wine "$HOME/.wine/drive_c/Program Files/NSIS/makensis.exe" install.nsi
 
−
 
 
−
Voila, there's now FileZilla_3_setup.exe in the current directory.
 

Please note that all contributions to FileZilla Wiki are considered to be released under the GNU Free Documentation License 1.2 (see FileZilla Wiki:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Cancel Editing help (opens in new window)
Retrieved from "https://wiki.filezilla-project.org/Cross_Compiling_FileZilla_3_for_Windows_under_Ubuntu_or_Debian_GNU/Linux"