FTP over TLS
Setup
Server Setup
Open the admin interface, and go to settings. Choose SSL/TLS (FTPS) settings, and choose to generate a new certificate. The two digit country code can be found by googleing (United States is just US - it can be confusing that two digit can be two letters, and not necessarily two numbers only).
Once you have generated the certificate, and chosen where to save it, filezilla will auto fill in the private key file, and the certificate file fields to point to the generated certificate.
At this point, you can either choose to allow SSL/TLS if the user opts, or you can force them to always use SSL/TLS, and not allow them to connect if they do not use it.
PROT P refers to the data transfers. Communication with the server is always encrypted if you use SSL/TLS.
Communication encrypted: PROT C, Communication+Data encrypted: PROT P.
If PROT P isn't enforced, client could send PROT C and transfer files unencrypted. If PROT P is enforced, PROT C is rejected.
Also see FTPS using Explicit SSL/TLS howto (Server).
Client Setup
For a client to connect to a server using SSL, then the host for that connection needs to be set to FTPS. In FileZilla client this means prefixing the host with "FTPES://" for "explicit" FTPS, or "FTPS://" for the legacy "implicit" FTPS.
Certificate Removal
The file trustedcerts.xml contains certificates for secure websites that you have told your FileZilla client to trust connections to. This file should not be confused with any certificates you have in use if you use FileZilla as a server as well.
BEGIN CERTIFICATE-----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END CERTIFICATE-----
Linux
In order to remove a saved certificate rename or modify the file ~/.config/filezilla/trustedcerts.xml.
Please note that older FileZilla versions used ~/.filezilla/trustedcerts.xml.
Explicit vs Implicit FTPS
FTPS (SSL/TLS) is served up in two incompatible modes. If using explicit FTPS, the client connects to the normal FTP port and explicitly switches into secure (SSL/TLS) mode with "AUTH TLS", whereas implicit FTPS is an older style service that assumes SSL/TLS mode right from the start of the connection (and normally listens on TCP port 990, rather than 21). In a FileZilla client this means prefixing the host with "FTPES://" to connect an "explicit" FTPS server, or "FTPS://" for the legacy "implicit" server (for which you will likely also need to set the port to 990).
SSL/TLS (FTPS) vs SSH (SFTP)
FTPS (FTP encrypted with SSL/TLS) should not be confused with SFTP (SSH). The latter is a completely different protocol, with more information here.
